AI + simulation for embedded R&D
Know more.
Build better.
Hardware. Firmware. Everything between. Embrelon simulates the whole R&D loop from one prompt and checks it against real devices.
In development / Seeking design partners
- Prompt
- CAD
- Sourcing
- Assembly
- Firmware
- Testing
- Physical world
- Cost
- Build file
- Parts
- 41
- Checks passed
- 112
- Cost a unit
- $71.80
- Build steps
- 38
How a run goes
- Describe
Type what the device must do, cost and survive.
- Design
Schematic, board layout and enclosure are drawn and checked.
- Source
Every part is chosen against stock, lead time and price.
- Build and code
Assembly is simulated and firmware is written for the real parts.
- Test
Drop, heat, water, battery and the device's own GPU, all in simulation.
- Hand off
The line gets a step-by-step build file and a cost per unit.
Describe a device. Watch it get built.
Embrelon simulates the whole hardware R&D loop from one prompt, then writes the build file for the robots on the line.
- Prompt
- CAD
- Sourcing
- Assembly
- Firmware
- Testing
- Physical world
- GPU
- Cost
- Output
From a sentence to a production line.
A rugged handheld GPS for hikers. Two-week battery, readable in full sun, under $90.
- CAD done
- Sourcing revised
- Testing 26 / 26
- Cost $71.80
38 steps
Pick-and-place, reflow profile, screw order, test jig.
One prompt, ten stages
An illustrative run. Embrelon is in development, so these figures show the shape of a run, not measured results.
The founders.
Puranjay PrashanthCo-founder
Anthony ReynaCo-founder